Standard features:

Blast Criteria

• 5 and 8 psi (freefield overpressure)
• 200 ms (duration)
• Medium damage (ASCE damage criteria)
• 12’ x 40’ and 14’ x 40’

Electrical

• 220/120VAC Single Phase main Panel
• 150A main breaker
• 120V/20amp duplex receptacles
• MC Cable with ground
• Penetrations
1. 2 – ¾”
2. 2 – 1-1/2”
3. 2 – 2”
• Ground lug posts
• 4’ fluorescent lay-in fixtures
• Three way light switches
• Emergency LED egress lighting with two directional beams
• Class 1 Div 2 exterior lighting

Communication

• CAT5e cabling
• RJ45 comm/data jacks

HVAC

• Class 1 Div 2 wall mount with aux heat, 120/240V Single Phase – Dual CSA & UL certified
• Wall mounted thermostats

Exterior Doors

• 3’0” x 7’0” blast rated doors
• Equal to or greater than building blast requirements
• Universal door closer
• Yale mortise lock with lever set hardware

Insulation Specifications

• Spray Polyurethane Foam (SPF) Thermal Insulation
• R30 on ceilings (R40 - optional)
• R25 on walls and floors

Interior

• Metal stud and track framing
• Vinyl coated Drywall with batten strip, Hampton Grey
• Vinyl cove base, Blue Grey
• Acoustical ceiling
• Tongue & groove dry ply sub floor
• injection molded, homogeneous, solid vinyl interlocking tile floor
• 3’0” x 7’0” solid core doors with jamb and locksets

Exterior Finish

• Sand blasted to near white finish
• paint system that meets C5-I standard for highly corrosive environments in accordance with ISO standards

Lifting

• lifting lugs on each corner for equal COG
• safety lugs on roof

Optional Features:

NFPA 496 compliance